Merlo Roto50.21 Rotating Telehandler

Always top of the Class.

Exclusive Comfort

An unprecedented design guarantees maximum functionality and comfort; grouping the information provided to the driver and the controls of the various systems and devices for optimal ergonomics. The reverse shuttle on the steering wheel is also present on the joystick.

Cab Entry

To ensure simple and easy access to the cab, the door of Merlo telehandlers can be opened by up to 180°. In addition, the inside of the door is equipped with a large handrail to help the operator when getting inside and outside of the cab.

Air Conditioning

Developed according to automotive standards, cutting the warm-up and cool-down times in half compared to a conventional air conditioning system. The inlet vent is placed on the side of the cab, away from potential sources of dust and dirt, while inside there are 8 vents.

Turret Rotation

Merlo rotating telehandlers can be equipped with different solutions for turret rotation. Depending on the machine configuration, three types of maximum turret rotation are available: • 400° rotation, foresees a mechanical rotation limiter positioned at 207° on the right and left sides, achieving a maximum rotation greater than 400°. • 600° rotation, with an electronic limiter placed at 300° on the right and left sides. • Continuous rotation, there is no limiter and the turret can continue to rotate seamlessly

Stabilisation

All rotating telehandlers are equipped with a self-stabilising and self-levelling system. In order to achieve the correct stabilisation, depending on the product ranges, there are two different solutions. • On/off stabilisers, they are characterised by a lever movement and provide a single stabilisation position. They ensure maximum ease of use and speed. • Multi-position stabilisers characterised by an arm that can slide out externally and a vertically descending stabilising foot. This solution allows the machine to be stabilised in an infinite number of configurations ranging from the fully retracted boom to its maximum extension, meeting the needs of the job site.

ASCS Roto

The ASCS system is equipped, either as an option or as standard, with a 10,1” colour display with integrated sensor for automatic brightness adjustment according to external light conditions. In this way, a simple reading of the stability conditions is always ensured, updated in real time, according to the load being handled and the implement in use. The operator can always see at what point the safety system will be triggered. Once the system intervenes by blocking all movements, a pop-up message appears, showing the operator all movements and operations which are not detrimental to the stability of the machine. Finally, the inclinometer is shown to maximise the safe use of the machine.