Monthly Archives: December 2016

Name: Allclass Brisbane
Address: 16 Parade Ground Place, Wacol, Brisbane, QLD, 4076, AU
Telephone: 1300 255 252
Price range: $$$

Excavator Checklists, Excavator Operation

Your Mini Excavator Prestart Checklist

It’s crucial to perform periodic safety checks on your equipment. Not only do daily inspections prevent accidents during machine operation, they also maximise efficiency and minimise costs.

To get you started here is our mini excavator prestart checklist.

Things to Do before Starting Your Mini Excavator

Walk around your mini excavator and look for cracks or dents on the exterior of the equipment.
Inspect various components of the excavator or mini loaderbody including the mounting holes, the bearing spacer, and the grease fitting. Keep an eye out for cracks or signs of wear and tear.
Search for leaks in the Hydraulic cylinder. Then, check the level of the engine oil, coolant, and hydraulic oil.
Remove the air and oil filters. Clean or replace them if required.
Check the area in front of the radiator. Dirt accumulates in this particular area and causes overheating problems.
Grease all hinge pins and bushings to cut down the cost of expensive repairs.
Make sure the mini excavator’s safety switches are in proper working order.
Next, get inside the cab. Always face the excavator and use the three-point contact to get in and out of the cab.
Turn on the equipment and listen for any unusual sounds or vibrations. The machine shouldn’t emit excessive exhaust fumes when it’s in operation.
It’s a good idea to look for leaks or emissions below the mini excavator or in the area in front of the operator’s seat.
Check the undercarriage components. Inspect the tracks, the drive sprocket, and the front idlers.
Check that the tracks have the right tension.
Test the indicator lights and the switches on the control panel.
Make sure there’s a fully operational fire extinguisher lying in the cab.
Clean the windshield and the heating and cooling vents.
Inspect the boom, arm, and bucket attachments for cracks or dents.
If the bucket teeth look worn out, replace the bucket. If you fail to do so, the mini-excavator will have to work much harder to perform everyday jobs.
Extend the arm and boom to determine if the machine is stable during operation. You must also lift the excavator blade and roll the machine forwards and backwards.
Perform a 360º rotation of the housing assembly.
Refer to the equipment’s safe working limits before beginning any new task.

If you perform these checks daily, you’re less likely to encounter problems when you operate your equipment.

More Information on Mini Excavators

If you’re looking for high-performing mini excavators for sale in Brisbane, get in touch with Allclass Construction Equipment.

We have a broad range of mini excavators and excavator parts and we have been selling excavators for the past 20 years.

With our modern excavator workshops and rapid response vehicles, we can also minimise machine downtime.

Call us on 1300 255 252 if you’re looking for new or used constructions equipment in Brisbane. Our qualified and knowledgeable sales advisors will help you pick the perfect excavator for the job.

Posted by Allclass Construction on December 28, 2016

Excavator Checklists, Safety Checklist

Excavator Safety Checklist – What to Do before You Start

Before your start operating any machinery, you must perform certain pre-start inspection checks. These checks can help you to prevent accidents on the work site and avoid unnecessary downtime. As well as this, they will enhance the overall life of your equipment!

As well as performing the necessary safety inspections, you should also maintain strict servicing schedules. Routine maintenance will prolong the life of your equipment and reduce operational costs. Always record the results of safety checks so you can refer to them if the need arises.

A Safety Checklist for Your Work Equipment

Walk around the equipment and check the work area. Make sure there’s enough space for the machine to carry out its work.
Before turning on the equipment, inspect the boom, the dipper arm, and the bucket. Look for any cracks or dents. Make sure the locking pin and the safety clip are in the right position.
Inspect the undercarriage area. Check the sprockets, idler wheels, track links, and rollers. Look for signs of wear and tear.
Next, check the hydraulic fluid and coolant level. Don’t forget to inspect the radiator and look for leaks.
Open up the engine bay and perform an oil check with a dipstick. You should do this after every four hours of operation.

Lubricate the bushings if required.
Get inside the cab to make sure the indicator lights and the controls are in proper working order.
Test the equipment by fully extending the boom arm and the dipper arm. Listen for unusual sounds.
Lift the boom arm up in the air and turn off the machine. Wait and see whether the boom arm moves downwards. If it does, you’ll know there’s an internal bypass in the cylinders.
Test the boom arm and bucket functions repeatedly to find out if there’s any excessive movement.
Check the levers and joysticks to ensure they’re working properly.
Be well aware of the safe operating limits of the equipment. If you’re not sure, refer to the manual or talk to the dealer.

Frequency of Inspection

If you’re operating your excavator under harsh conditions, service it more often. To determine the right service intervals for your excavator, refer to the owner’s manual and perform a proper risk assessment. If your equipment is showing signs of deterioration, pay closer attention during your inspections and shorten your service intervals.

Servicing for Your Construction Equipment

If you want to optimise your excavator’s performance, get in touch with the experts at Allclass Construction Equipment. We have a 5 star Kubota accredited service centre in Brisbane. We can help you to prevent machine downtime by servicing your excavators with the best tools.

We also sell genuine excavator parts. Whether you’re looking for filter kits, tracks, or rollers, you’ll find them on our shelves.

Don’t hesitate to contact us if you need attachments or Kubota mini excavators. Our sales representatives will help you find a machine at an affordable price.

Call us on 1300 255 252 for an instant quote or get in touch with us online.

Posted by Allclass Construction on December 28, 2016

Excavator Maintenance

Why You Should Get Your Equipment Repaired by Accredited Centres

Earthmoving machines are valuable tools for any construction business. But buying a fleet of machines is only the first step towards successful operations. You have to decide who is going to service and repair your equipment on an ongoing basis.

Preventive maintenance reduces machine downtime and helps the business run smoothly. It also lowers the cost of owning various pieces of machinery. To keep your equipment running like new throughout its life, consider sending it to an accredited centre.

Why Use an Accredited Centre?

Local repair centres give you services that are cheaper than those offered by accredited centres. While you might save money on repairs, there are many things you will have to sacrifice in the bargain.

If the centre is accredited, it suggests that its services and products are of consistently high quality. The certification also proves that the company is technically competent and fully compliant with legal rules, policies, and regulations relating to Kubota and TORO machinery.

5 Advantages of Using an Accredited Centre

Accredited centres have the latest tools and equipment to service and repair machines. Since they maintain high standards of service, they won’t use inferior lubricants or parts when they’re repairing your equipment.
Local service centres often suggest cheap aftermarket parts to replace faulty parts. These knock-offs won’t last you long. You may even end up sending the machine for repairs more often. Accredited service centres use genuine parts to fix faulty components. Manufacturers specifically design genuine parts so they match individual pieces of equipment. They last longer and leave the machine in perfect physical condition.
Accredited service centres make sure they train their technicians, giving them the proper education and experience to hone their skills. With accredited centres, you can rest assured that your equipment is in safe hands.

Accredited service centres maintain service log books. Service log books make paperwork easy. You could even get a better resale price for your machines if you prove that you’ve kept them in top working condition.
Many authorised service centres offer reasonably priced service plans. They also have well-equipped service trucks that travel to your location for repairs.

Construction Solutions from Accredited Experts

If you’re looking for an accredited service centre, visit Allclass Construction Equipment.

We run 5-star Kubota accredited service centres and offer sophisticated mobile service vehicles. If you want to reduce downtime and promote profits, we can travel to you for quick repairs.

Allclass Construction Equipment also has both new and used excavators for sale in Brisbane. We also stock a large range of machine and excavator parts with 96% fill rates.

To learn more about the certified service difference, give us a call on 1300 255 252. Don’t forget to view our range of Kubota mini excavators online and get in touch with any enquiries.

Posted by Allclass Construction on December 21, 2016

Excavator Maintenance

Maintaining Your Mini Excavator

To increase the efficiency of a mini excavator, you must carry out routine preventive maintenance procedures. If you spend time servicing the excavator, your machine will last you longer. You won’t have to worry about unexpected delays due to downtime and you won’t even have to pay to transport the machine to a service centre.

As you can see, preventive maintenance has many benefits. Take a look at our mini excavator servicing tips below.

Preventive Maintenance Checks

It doesn’t matter how busy the day looks, you shouldn’t operate an excavator before completing the daily checks . Examine the hydraulic fluid and the engine oil and top them up if required. If you don’t know which fluid is right for your machine, refer to the owner’s manual or talk to the dealer.

Inspect the fuel filter once a week and remove any water or build-up that’s present. Replace the filter if necessary and look for leaks in the hydraulic hoses. If you do these simple checks every day, you’ll save a lot of money on unnecessary repairs.

Mini Excavator Servicing Tips

It’s useful to inspect and grease the pivot points of your mini excavator. Regular greasing will prevent wear and tear. If you intend to operate the excavator in water, you should also lubricate the pivot points before and after use.

It’s also important to examine the undercarriage components and the rubber tracks. The undercarriage area traps a lot of mud and dirt. Clean this area periodically and make sure the rubber tracks maintain the correct tension. If they’re too tight, they will get worn out and break. If they’re too loose, the operator won’t be able to manoeuvre the equipment properly.

It’s a good idea to check the bucket attachment for signs of damage. If the teeth look worn out, the machine will have to work much harder to complete the job. Don’t overwork the equipment. Replace the bucket and other attachments if you have to.

Additional Tips

Keep an eye on the radiator and the oil cooler. If you see any coolant leaks, attend to the coolant system immediately. Wipe away any fluid that has leaked out – this will only trap dust and add to your troubles.

Apart from following these guidelines, you should also have your machine serviced regularly and on time. Refer to the owner’s manual to find out how often you need to do this.

Servicing Mini Excavators in Brisbane

If you want to service your mini excavators and mini loaders, look no further than Allclass Construction Equipment. We have a 5 star Kubota accredited service team in Brisbane. Together with the right knowledge and tools, we keep your machines in good working condition.

We also have used mini excavators for sale and a range of genuine parts to restore your equipment. Our products are high quality and they will meet the demands of your project.

Call us on 1300 255 252 if you have any questions or explore our range of mini excavators for sale online.

Posted by Barbara Moresby-White on December 21, 2016

Excavator Maintenance

Are Genuine Parts Really Worth It?

Second-hand parts or replicas are cheaper than genuine parts. While they may seem more affordable at first, they will add to the cost of running your machine in the long-term. So is it worth paying a big price for genuine earthmoving parts? Let us find out.

Genuine vs. Aftermarket

Heavy machinery manufacturers always recommend using genuine parts. This is because the manufacturers have specifically designed genuine parts for use with individual machines. Genuine parts have the right configurations and integrate well with all the other components of the equipment.

Imitations may fit just as well, but they won’t keep your machine in optimal working condition. They’re more likely to lead to unscheduled breakdowns, machine downtime and loss of revenue. You will also have to consider the cost of buying another spare part if the first one fails. Genuine parts contain high-quality materials that last much longer.

Other Considerations

It’s quite tempting to save a few hundreds and go with an aftermarket part. The truth is that aftermarket parts don’t handle loads the way genuine parts do. Construction equipment, in particular, should be tough enough to penetrate or dig hard substrate. If you use sub-standard parts, your machine won’t perform to its full capacity.

The Risk Associated with Aftermarket Parts

Construction sites are full of risks. If you use aftermarket parts, your equipment may malfunction and end up damaging people or property.

If you own and run your own construction business, you’ve probably purchased insurance to protect your employees and your company. If you use cheap imitations on your machines, you might end up voiding that insurance cover.

Aftermarket parts may also promote rapid wear and tear of the other internal components. To make sure your equipment runs smoothly for its entire life-cycle, you must avoid using imitation spare parts.

Finding Genuine Excavator Parts in Brisbane

If you need Kubota and TORO genuine parts or construction equipment in Brisbane, call the team at Allclass Construction Equipment. We know it is imperative to find the right part quickly and we have an outstanding 96% fill rate. That means we stock 9.6 out of every ten items ordered.

Whether you need Kubota or TOROparts in Brisbane, you’ll find them under our roof.

We also have high-quality new and used excavators for sale. Our qualified and friendly sales staff will help you choose the right equipment for your project.

If you’re looking for reliable Kubota dealers in Brisbane, call us on 1300 255 252. You can also visit us online to explore our range of construction equipment.

Posted by Barbara Moresby-White on December 15, 2016